Looking for a fall crochet pattern to cozy up your space? Well look no further, this free crochet pumpkin pattern made with granny squares is the perfect thing to make to cozy up your autumn decor.
These handmade pumpkins are easy to crochet and offer a fun twist to your traditional pumpkin pattern.
Check out the free crochet pumpkin pattern + guided video tutorial down below or purchase a printable PDF pattern here.
This post contains affiliate links, which means I make a small commission at no extra cost to you. See my full disclosure here.
If you want to make a crochet pumpkin pattern that is a little bit different than your traditional pumpkin pattern (like this one here and here), this project is for you! The Maple Pumpkin Pattern is made entirely out of granny squares and uses bulky-weight yarn.
So if you’re like combining granny squares with chunky yarn, definitely give this pattern a go. It’s made using Sunburst Granny Squares and my go-to bulky-weight yarn, which is Hue + Me by Lion Brand.
You’re only going to need 2 balls of yarn, and some other basic supplies to make these pumpkins. So let’s go over how these crochet pumpkins come together.
Quick Overview of How These Crochet Pumpkins With Granny Squares Are Made
You’ll start this pattern by first making 4 Sunburst Granny Squares, and then you’ll make a border around the granny squares using half double crochet and single crochet. Then you will seam the granny squares together using the slip stitch method, and then you’ll seam the bottom of the pumpkin.
Lastly, you’ll add the filling and close the top of the pumpkin. Then you will add your cute stem, and you’re done! It’s a simple crochet pumpkin pattern that can be made in just a few hours.
Here is an overview of the stitches and the yarn you’ll use for this free crochet pumpkin pattern.
Stitches
For this crochet pattern, you will need to know how to make a chain, slip stitch, half-double crochet, double crochet, puff stitch, and bobble stitch.
The bobble stitches are made using double crochets. If you need a little bit of help with how to make this granny square, make sure to check out the step-by-step video tutorial (linked in the notes section).
Stitch Overview
- chain: Yarn over, pull through loop on hook.
- slip stitch: Insert hook into stitch, yarn over, pull through stitch and loop on hook.
- single crochet: Insert hook into stitch, yarn over and pull through, yarn over and pull through last two loops on hook.
- half double crochet: Yarn over, insert hook into stitch, yarn over and pull through stitch. Yarn over one more time and pull through last three loops on hook.
- double crochet: Yarn over, insert hook into stitch and pull through, yarn over and pull through first two loops on hook, yarn over and pull through last two loops on hook.
- puff stitch: Yarn over, insert hook into stitch and pull up a loop. Then yarn over again and insert hook into the same stitch and pull up another loop ( 5 loops on hook). Yarn over again, insert hook into the same space and pull up another loop. (7 loops on hook). Yarn over and pull through all 7 loops. Yarn over once more to close the puff stitch.
- bobble stitch: yarn over, insert hook into stitch and pull up a loop. Yarn over and pull through 2 loops (2 loops on hook). Make 3 more incomplete double crochet stitches. There are now 5 loops on the hook. Now yarn over and pull through all 5 loops on your hook. Yarn over once more to close the bobble stitch
Yarn
For this crochet pumpkin pattern, I used Lion Brand Hue + Me yarn. Lion Brand Hue + Me yarn is a number 5 bulky-weight yarn that’s made from acrylic and wool. It’s a soft, warm, textured yarn that works up beautifully.
It also comes in lots of different colors, so you can choose whatever color you like. I highly recommend this yarn for this project, but you could always use a different bulky-weight yarn. Just make sure that you make a gauge swatch, as there can be slight differences.
You will only need about 2 skeins of yarn for this pumpkin pattern, so it also makes a great stash buster if you only have a few skeins left of bulky-weight yarn.
Alright, let’s start our pattern!
Description:
Add some cozy charm to your fall decor with the Maple Pumpkin Pattern. This free crochet pattern is made with granny squares and uses bulky weight yarn.
Materials:
- 2 skeins of Lion Brand Hue + Me yarn (Weight 5/ 4.4 oz, 137 yds). Pumpkins in the photo are made with the color Salt, Desert, and Agave. You will need a total of 200 yards or you can use another number 5 bulky weight yarn.
- 1 Skein of Lion Brand Wool Ease Yarn (Weight 4/3, 180 yds) in the color Thrush (brown). You will only need 10 yards of yarn. This is used for the stem of the pumpkin.
- 8.0 (L) mm Crochet Hook.
- 1 Stitch Marker.
- Darning Needle.
- Scissors.
- 1 bag of Poly-fill.
Gauge:
1 Starburst Granny Square measures approximately 8″ inches x 8″ inches.
Abbreviations:
- ch – chain: Yarn over, pull through loop on hook.
- sl st – slip stitch: Insert hook into stitch, yarn over, pull through stitch and loop on hook.
- sc – single crochet: Insert hook into stitch, yarn over and pull through, yarn over and pull through last two loops on hook.
- hdc – half double crochet: Yarn over, insert hook into stitch, yarn over and pull through stitch. Yarn over one more time and pull through last three loops on hook.
- dc – double crochet: Yarn over, insert hook into stitch and pull through, yarn over and pull through first two loops on hook, yarn over and pull through last two loops on hook.
- puff stitch: Yarn over, insert hook into stitch and pull up a loop. Then yarn over again and insert hook into the same stitch and pull up another loop ( 5 loops on hook). Yarn over again, insert hook into the same space and pull up another loop. (7 loops on hook). Yarn over and pull through all 7 loops. Yarn over once more to close the puff stitch.
- bobble stitch: Yarn over, insert hook into stitch and pull up a loop. Yarn over and pull through 2 loops (2 loops on hook). Make 3 more incomplete double crochet stitches. There are now 5 loops on the hook. Now yarn over and pull through all 5 loops on your hook. Yarn over once more to close the bobble stitch.
Size of Pumpkin:
The height of the pumpkin is 4 1/2″ inches.
Pattern Notes:
- Pattern written in U.S Terms.
- Pattern is explained in 3 parts. In part 1, you will make 4 Starburst Granny Squares. In part 2, you will seam your Starburst Granny Squares Together to form the pumpkin, and in part 3 you will make your stem and add it to your pumpkin.
- The stem is made using a mini yarn hank. Instructions are provided on how to make a yarn hank. You can also find a link to the step-by-step photo + video tutorial here.
- Total stitches for row are indicated between ( ).
- Link to full step-by-step video tutorial can be found HERE.
Part 1: Maple Pumpkin Pattern
Make 4 Sunburst Granny Squares
Start with a magic circle (alternatively, you can also chain 5, and join with a slipstitch to the first chain to form a loop).
Round 1: ch 3 (counts as first dc), and make 15 dc into your magic circle. Sl st to top of the 3rd chain (16 sts).
Round 2: ch 2, yarn over, insert hook into same stitch as joining and pull up a loop. Then yarn over again and insert hook into the same stitch and pull up another loop (5 loops on hook). Yarn over again, insert hook into the same space and pull up another loop. (7 loops on hook). Yarn over and pull through all 7 loops. Yarn over once more to close the puff stitch.
Now continue to work 15 more puff stitch in each of the next stitches from the previous row. Work the puff stitches as follows: Yarn over, insert hook into same stitch as joining and pull up a loop. Then yarn over again and insert hook into the same stitch and pull up another loop (5 loops on hook). Yarn over again, insert hook into the same space and pull up another loop. (7 loops on hook). Yarn over and pull through all 7 loops. Yarn over once more to close the puff stitch. (16 puff stitches total).
Then make a sl st within the first space after your first puff stitch.
Round 3: ch 2, * yarn over, insert hook into space between 2 puff stitches and pull up a loop. Yarn over and pull through 2 loops (2 loops on hook). Make 3 more incomplete double crochet stitches. There are now 5 loops on the hook. Now yarn over and pull through all 5 loops on your hook. Yarn over once more to close the bobble stitch, and ch 1.
Now repeat starting from * 15 more times (16 bobble stitches total). Then make a sl st within the first space after your first bobble stitch.
Now we will make half double crochets around the circle.
Round 4: Ch 2 (counts as 1 hdc). Make 2 more hdc in same space. Then ch 2, and make 3 more hdc in same space. Then make 3 hdc in each of the next 3 spaces. Then work 3 hdc, ch 2, 3 hdc in the following space (first side is made).
Now we’re going to repeat that sequence for the next 3 sides. Work the next sides as follows:
*Make 3 hdc in each of the next 3 spaces, then work 3 hdc, ch 2, 3 hdc in the following space. Repeat from *3 more times. The sl st to first stitch.
Now we’re going to make a sc border around our square.
Round 5: ch 1, work a sc in the first stitch of the previous row, and continue to make a sc in each stitch of the previous row. Then sl st to first ch. (68 stitches).
Finish off and work in any tail-ends.
Now you’re going to seam your granny squares together to form the base of the pumpkin.
Part 2: Seaming the Crochet Pumpkin Together
Step 1: Grab each Starburst Granny Square and lay them next to each other in a row.
Step 2: Then cut a piece of yarn three times the size of your granny squares, and seam the inner sides together using the slip stitch method so that all 4 are connected.
To attach them using the slip stitch method:
Reattach your yarn to the corner of one of the squares, then insert your hook into the back loop of the first stitch of the first square, and back loop of the first stitch of the second square. Then yarn over, and pull through both loops of both granny squares, and the loop on your hook.
Then repeat the sequence in every stitch along the side of the granny square until your two granny squares are connected together. Continue to connect all 4 granny squares.
Finally, connect the first granny square to the last granny square of the row. You should now have a circular tube.
Step 3: Cut a piece of yarn three times the size of your tube and start working your yarn between each back loop of each stitch around the tube. Once you have finished working one side, pull slowly so the stitches on the side squish together, then move on to the next side and repeat the same process – working between each stitch and then pulling the yarn to squish the stitches together.
Note – I found it helpful to place a knot with a stitch marker in it before I started weaving in between my stitches. This will help prevent the yarn from being pulled out if you pull to tightly between each side (photo down below for reference).
Step 4: Lastly, pull tight one more time on both sides to close the tube together. Make a couple of knots to secure the tube.
Note – your tube will not perfectly close together, there will be a tiny gap at the base (middle of the pumpkin). However, this will be at the bottom of your pumpkin when it’s finished, so it won’t be noticeable in the end.
Step 5: Grab your Poly-fill and fill your pumpkin. Then repeat steps 3 and 4 to close your pumpkin.
This part is optional, but you can always close the hole a bit more by inserting your yarn through the stitches in the middle a couple of times to make less of a gap.
Now you will move onto part 3, which is making the stem and adding it to your pumpkin.
Part 3: Making and Adding Your Stem to Your Pumpkin
The stem of the pumpkin is made using a handmade yarn hank. Once the mini yarn hank is made, you will then glue or attach it with a piece of yarn to the top center of your pumpkin.
Follow the directions down below to make a mini yarn hank. If you would like to see step-by-step photos and a video tutorial on how to make a mini yarn hank, then click this link HERE.
Steps to Making a Mini Yarn Hank
Step 1: Grab 1 blocking mat and place two pins 6 inches apart from each other.
Step 2: Then grab your yarn (Lion Brand Wool Ease Yarn in the color Brown) and carefully wind your yarn around the two pins 20 times.
Step 3: Take the 2 tail-ends and tie a knot.
Step 4: Then pull your yarn carefully off the pins and hold the ends of the yarn. Then place one end of the yarn onto your finger on the right side, and then place the other yarn end on one finger on the left side.
Step 5: Then twist the yarn using your one finger on the right side.
Step 6: Once you have a tight twist, push the two sides together (this should happen naturally), and then pull the right side over the left side. Trim the two ends of the knot you created in step 3. You should now have a yarn hank.
Now you can either glue one side of the yarn hank to the center of your pumpkin or you can attach it with a piece of yarn. To glue the yarn hank, simply add some glue to the top of the yarn hank and press it down to the center of the pumpkin. To attach it with a piece of yarn, follow the next steps.
Step 7: Take your darning needle with an extra strand of yarn (about 6″inches) and insert it through the top of the yarn hank and pull through.
Step 8: Remove your darning needle and tie a knot with the yarn strand at the top of the mini yarn hank.
Step 9: Then place your mini yarn hank in the center of your pumpkin and attach it with the yarn to one of the stitches in the middle. Then secure it with a knot. You should now have a stem attached to your pumpkin.
You’re finished!
I hope you enjoyed making the Maple Pumpkin Pattern.